We would like to activate QGM for a maintenance project but are not ready to activate ChaRM.

Since ChaRM normally takes care of the different change types such as normal, standard and urgent changes we will not have that functionality. Besides I understand QGM changes to be regarded as normal changes.

Now - will we be able to do urgent transports in a maintenance project that only are activated for QGM? If not, do you see any possible workarounds?

Thanks in advance,

Dear all,

from time to time it happens that a Wily Enterprise Manager stops but the connected diagnostic agent still is running. For how many days can the collected data be stored by the agent?

Best regards

Martin Roehr

We use CHARM for 3system ECC & BW landscapes and are going through an OSDB migration from HPUX to Linux. The Developers & Functional Analysts do not want to go into a freeze period or cleanup their transports in development. The SIDs are not going to change in the new environment.

Is there a way to make this seamless. Is there a way to accomplish this without changing projects or requests in Solution Manager. My thought was I would need to remove the old systems, add the new ones  and create new projects.

Does anyone know of a guide or checklist in dealing with CHARM in an OSDB migration effort.

Thanks,

Barry Keating

Basis Administrator

Rust Oleum

Hi gurus

Finally I managed to install SAP Solman with no error messages, install log itself looks good. Also I managed to start SAP Solman with the default instance 00, client 001 and succeeded with SAP* login. Also I executed Solman_setup transaction and finished the very first steps, but have stacked with SAP router, so therefore I did not manage to complete all procedures that are needed to be set in solman_setup .
I've opened the ticket with SAP and registered external IP address of my Solman server as my router's IP, firewall has been configured correctly – ping of SAP router's Ip returns positive values.

Configured SAP router on my end as it's written here: https://websmp104.sap-ag.de/saprouter-sncdoc at least i do hope that everything has been configured as needed, because no error messages is being generated

There are 2 issues that troubles me:
-When I execute saprouter –r –K "p:my data goes here" command prompt window hangs on 'trcfile dev_rout no logging active' screen and nothing happens (see printscreen) . I think that smth is wrong, but have no idea what can be cause of the issue.

-When I execute oss1 in SAP gui -> technical settings and add information to SAPROUTER 1 area press login information then I got pop up window which says that'Unable to connect to SAPNET  message server….', so most likely SAP router configuration on my side is faulty?

From where do i need to start? Is there a way how to troubleshoot sap router from my side, or better to open technical message with SAP supp here?

many thanks in advance.

Hello,

Let me brief about our environment.

We installed our ABAP and Java systems as distributed installations with virtual host names in one Virtual machine( one IP address ).

scs<sid>

db<sid>

ci<sid>

These virtual host names are registered in DNS server.

Please clarify.

1)  I am new to Solution Manager configuration not sure about how to install SMD agents. Do I have to install three SMD agents for each virtual host name

or

One SMD agent is enough for whole machine.

2) One of the Solman consultants told me that, each virtual host name must have one SMD agent and one IP address.

   So in One ABAP system, I have 4 SMD agents , one is for SCS, one is for DB, one is for CI and one is for physcial host ( O.S ).

Is it so ?

3) He also suggested that I can use on-the-fly feature, so one SMD agent is enough for all virtual host names and O.S.

Please guide me.

With Thanks and Regards,

venkat

Hi Experts,

In our project, we have a required that the document should have different status flow for template proejct and Implementation projects.

As I could understand, the status flows are assigned to the document in the project template tab under the Project standards --> documetation types in the project administration tcode, and also in the SPRO.

But, the same status flow is available in the template and implementation projects.

Is there any way, we can differentiate the status flow of the document based on implementaton and template projects ?

Hi All,

Can you please help me with  SAP Configuration guide for EEM  as I did it  1 1/2 year back but I did not recollect the document and I do check

the below,but I am not sure where I need to start or if we have one single guide which will help me out  to whole process 

http://scn.sap.com/docs/DOC-27318

http://scn.sap.com/docs/DOC-27265

http://wiki.sdn.sap.com/wiki/display/EEM/InstallationGuide -

http://scn.sap.com/people/thomas.goetz/blog/2011/12/07/end-user-experience-monitoring--what-it-is-and-why-you-should-consider-it

https://websmp201.sap-ag.de/~sapidb/011000358700000964442011E/index.htm

http://wiki.sdn.sap.com/wiki/display/EEM/Home

Note 1357045 - End-User Experience Monitoring Central Note

Regards,

Neni

Hi everyone,

In the basic configuration of SOLMAN_SETUP on Solution Manager 7.0 EHP1 SP Stack 30, I encounter the following error :

- Component ST-A/PI: release 01Q_700 is incorrect, expected 01P_700: see note 1274287

- Component ST-A/PI: release 01Q_700 is incorrect, expected 01[N-Z]_700SOL: see note 1274287

However, the report RTCCTOOL recommends to implement ST-A/PI 01Q_700 :

How to fix this issue ?

Best regards, Nicolas

Hello,

I have the following issue.

I want to use the function More - Send E-Mail on my Request for Change (transaction type YMCR, copy from SMCR).

To do this, I have added copy control entries for YMCR to 0005 Outgoing Email.

(IMG activites "Define Copying Control for Transaction Types" and "Specify Mapping Rules for Copy Control").

Now, this functionality works.

However, the Outgoing Email now also appears in the "Request for Change Scope" assignment block...

Is there any way to suppress this in the Scope block?

Many thanks in advance for advice on this,

Kind regards,

Joyca

Hello team,

  We have planned to upgrade our solution Manager from 7.0 EHP1 to 7.1 .

Please suggest us would we go for an upgrade , if yes why ? If no Why ? , would like to know.

                                                     OR

Should we go for an fresh implementation of Solution Manager 7.1 instead of upgrade the same.

Please suggest

vishnu

Hello,

after installing Solution Manager 7.1 on Linux I got multiple errors in SLG1 (seems to be monitoring errors):

ACE_MESSAGES132: "Agent  ACE not registered"

What does it mean and how can I correct it?

Hi, experts!

I copied standard roles for ChaRM.

When Change manager release for development RfC, proper ibase component don’t copy to change document.

It occurs if I use copied roles.

I don't see miss authorization in ST01.

Have you any idea why it happens?

Thanks,

Yuliya

Hello,

Is there any possibility to move/copy SD incidents (ZMIN) in SM 7.1 SP5 fro one SolMan to another SolMan (same versions).

Hi Experts,

I have followed below document for SLA Configuration.

http://www.service.sap.com/~sapidb/011000358700000789962012E

I performed all the steps mentioned in the document. Still email alerts are not coming. Scott configurations are already done and we are receiving system alerts. Did I missed any other things. Please suggest.

Hi,

I am facing an issue with EEM connection when doing the monitoring  in SolMan_workcenter

Steps:

  SolMan_Workcenter - Technical monitoring-EEM
I when I opend new window to check the monitoring setup  it is in red with the error, please check the below screen short:

--All my connection to SMD and the SolMan setup/EEM setup are green.

-- and also the variables entered correctly,please check the below screen short:

--I had give the right user in the variables with password and the user I had provided all the  EEM authorization. 

Regards,

Neni

HI,

We are planning to upgrade solution manager patch  from sp04 to sp08. Currently solution manager is configured with Service Desk, CHARM,EWA,Test Management.

I would like to know, after upgrade to SP08 patch are all my earlier configuration of Service Desk, CHARM,EWA,Test Management.will it work fine?

Kindly suggest,

Thank you

Nithin

Hello Experts,                                I am facing  problem to start the SAPMMC console server, disp+work.exe dispatcher stopped with Gray color. I  am using SAP TRIAL version. Please provide inputs what can be the issue.  Thanks.  ****************************************************  Attaching dev_disp  and DEV_W0 file with this. *********************************************  --------------------------------------------------- trc file: "dev_disp", trc level: 1, release: "720" --------------------------------------------------- sysno      00 sid        NSP systemid   562 (PC with Windows NT) relno      7200 patchlevel 0 patchno    46 intno      20020600 make       multithreaded, Unicode, 64 bit, optimized profile    \\RK\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_RK pid        3044   Thu Sep 19 00:35:54 2013 kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC) length of sys_adm_ext is 588 bytes *** SWITCH TRC-HIDE on *** ***LOG Q00=> DpSapEnvInit, DPStart (00 3044) [dpxxdisp.c   1252]      shared lib "dw_xml.dll" version 46 successfully loaded      shared lib "dw_xtc.dll" version 46 successfully loaded      shared lib "dw_stl.dll" version 46 successfully loaded      shared lib "dw_gui.dll" version 46 successfully loaded      shared lib "dw_mdm.dll" version 46 successfully loaded      shared lib "dw_rndrt.dll" version 46 successfully loaded      shared lib "dw_abp.dll" version 46 successfully loaded      shared lib "dw_sym.dll" version 46 successfully loaded      shared lib "dw_aci.dll" version 46 successfully loaded rdisp/softcancel_sequence :  -> 0,5,-1 use internal message server connection to port 3900 rdisp/dynamic_wp_check : 1 rdisp/calculateLoadAverage : 1  Thu Sep 19 00:35:59 2013 *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6393] MtxInit: 30000 0 0 DpSysAdmExtInit: ABAP is active DpSysAdmExtInit: VMC (JAVA VM in WP) is active DpIPCInit2: write dp-profile-values into sys_adm_ext DpIPCInit2: start server >RK_NSP_00                               < DpShMCreate: sizeof(wp_adm)          31696     (2264) DpShMCreate: sizeof(tm_adm)          5517056     (27448) DpShMCreate: sizeof(wp_ca_adm)          64000     (64) DpShMCreate: sizeof(appc_ca_adm)     64000     (64) DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080 DpShMCreate: sizeof(comm_adm)          584080     (1144) DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064 DpShMCreate: sizeof(slock_adm)          156064     (104) DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880 DpShMCreate: sizeof(file_adm)          268880     (80) DpShMCreate: sizeof(vmc_adm)          30128     (2152) DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192) DpShMCreate: sizeof(gw_adm)     48 DpShMCreate: sizeof(j2ee_adm)     3936 DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000007EF0050, size: 6812336) DpShMCreate: allocated sys_adm at 0000000007EF0060 DpShMCreate: allocated wp_adm_list at 0000000007EF3030 DpShMCreate: allocated wp_adm at 0000000007EF3220 DpShMCreate: allocated tm_adm_list at 0000000007EFAE00 DpShMCreate: allocated tm_adm at 0000000007EFAE50 DpShMCreate: allocated wp_ca_adm at 000000000843DD60 DpShMCreate: allocated appc_ca_adm at 000000000844D770 DpShMCreate: allocated comm_adm at 000000000845D180 DpShMCreate: allocated slock_adm at 00000000084EBB20 DpShMCreate: allocated file_adm at 0000000008511CD0 DpShMCreate: allocated vmc_adm_list at 0000000008553730 DpShMCreate: allocated vmc_adm at 00000000085537E0 DpShMCreate: allocated gw_adm at 000000000855ADA0 DpShMCreate: allocated j2ee_adm at 000000000855ADE0 DpShMCreate: allocated ca_info at 000000000855BD50 DpShMCreate: allocated wall_adm at 000000000855BD70 DpCommAttachTable: attached comm table (header=000000000845D180/ft=000000000845D190) DpSysAdmIntInit: initialize sys_adm rdisp/test_roll : roll strategy is DP_NORMAL_ROLL dia token check not active (6 token) MBUF state OFF DpCommInitTable: init table for 500 entries DpFileInitTable: init table for 2800 entries DpSesCreateTable: created session table at 0000000002FA0050 (len=161328) DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80 EmInit: MmSetImplementation( 2 ). MM global diagnostic options set: 0  client 0 initializing ....  InitFreeList  block size is 4096 kByte.  Info: em/initial_size_MB( 4043MB) not multiple of em/blocksize_KB( 4096KB)  Info: em/initial_size_MB rounded up to 4044MB Using implementation view  Using memory model view.  Memory Reset disabled as NT default  1010 blocks reserved for free list. ES initialized. DpVmcSetActive: set vmc state DP_VMC_ENABLED DpVmcSetActive: set vmc state DP_VMC_ACTIVE DpVmcInit2: o.k. MPI: dynamic quotas disabled. MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%  rdisp/http_min_wait_dia_wp : 1 -> 1 ***LOG CPS=> DpLoopInit, ICU ( 3.4 3.4 4.1) [dpxxdisp.c   1638]  Thu Sep 19 00:36:00 2013 ***LOG Q0K=> DpMsAttach, mscon ( RK) [dpxxdisp.c   12244] MBUF state LOADING DpStartStopMsg: send start message (myname is >RK_NSP_00                               <) DpStartStopMsg: start msg sent CCMS uses Shared Memory Key 73 for monitoring. CCMS: AlInitGlobals : alert/use_sema_lock = TRUE. CCMS: Initalized shared memory of size 60000000 for monitoring segment. CCMS: Checking Downtime Configuration of Monitoring Segment. CCMS: AlMsUpload called by wp 1024.  Thu Sep 19 00:36:02 2013 CCMS: AlMsUpload successful for \\RK\saploc\NSP\DVEBMGS00\log\ALMTTREE.DAT (650 MTEs). CCMS: start to initalize 3.X shared alert area (first segment). DpMBufHwIdSet: set Hardware-ID ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296] MBUF state ACTIVE DpWpBlksLow: max wp blocks in queue is 800 (80 %) MBUF component UP DpMsgProcess: 1 server in MBUF DpAppcBlksLow: max appc blocks in queue is 500 (50 %)  Thu Sep 19 00:36:40 2013 *** ERROR => DpHdlDeadWp: W0 (pid 3416) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W1 (pid 3852) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W2 (pid 3068) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W3 (pid 3120) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W4 (pid 1492) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W5 (pid 3936) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W6 (pid 3908) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W7 (pid 3680) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W8 (pid 3872) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W9 (pid 4100) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W10 (pid 4112) died (severity=0, status=0) [dpxxwp.c     1507] *** ERROR => DpHdlDeadWp: W11 (pid 4156) died (severity=0, status=0) [dpxxwp.c     1507] *** DP_FATAL_ERROR => DpWPCheck: no more work processes *** DISPATCHER EMERGENCY SHUTDOWN *** increase tracelevel of WPs NiWait: sleep (10000ms) ... NiISelect: timeout 10000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:50 2013 NiISelect: TIMEOUT occured (10000ms) dump system status Workprocess Table (long)               Wed Sep 18 19:06:50 2013 ========================  No Type  Pid    Status  Cause Start Rstr  Err Sem Time Program          Cl  User         Action                    Table -------------------------------------------------------------------------------------------------------------------------------  0 DIA       -1 Ended         no    no     1   0    0                                                                          1 DIA       -1 Ended         no    no     1   0    0                                                                          2 DIA       -1 Ended         no    no     1   0    0                                                                          3 DIA       -1 Ended         no    no     1   0    0                                                                          4 DIA       -1 Ended         no    no     1   0    0                                                                          5 DIA       -1 Ended         no    no     1   0    0                                                                          6 UPD       -1 Ended         no    no     1   0    0                                                                          7 ENQ       -1 Ended         no    no     1   0    0                                                                          8 BTC       -1 Ended         no    no     1   0    0                                                                          9 BTC       -1 Ended         no    no     1   0    0                                                                         10 SPO       -1 Ended         no    no     1   0    0                                                                         11 UP2       -1 Ended         no    no     1   0    0                                                                         Dispatcher Queue Statistics               Wed Sep 18 19:06:50 2013 ===========================  +------+--------+--------+--------+------------+------------+ |  Typ |    now |   high |    max | writes     |  reads     | +------+--------+--------+--------+------------+------------+ | NOWP |      0 |      2 |   2000 |          6 |          6 | +------+--------+--------+--------+------------+------------+ |  DIA |      5 |      5 |   2000 |          5 |          0 | +------+--------+--------+--------+------------+------------+ |  UPD |      0 |      0 |   2000 |          0 |          0 | +------+--------+--------+--------+------------+------------+ |  ENQ |      0 |      0 |   2000 |          0 |          0 | +------+--------+--------+--------+------------+------------+ |  BTC |      0 |      0 |   2000 |          0 |          0 | +------+--------+--------+--------+------------+------------+ |  SPO |      0 |      0 |   2000 |          0 |          0 | +------+--------+--------+--------+------------+------------+ |  UP2 |      0 |      0 |   2000 |          0 |          0 | +------+--------+--------+--------+------------+------------+  max_rq_id          10 wake_evt_udp_now     0  wake events           total     8,  udp     6 ( 75%),  shm     2 ( 25%) since last update     total     8,  udp     6 ( 75%),  shm     2 ( 25%)  DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[1] = 0.000000 / -1.000000 % Dispatcher Load Statistics +------+---------+---------+---------+ |  Typ |     LA1 |     LA5 |    LA15 | +------+---------+---------+---------+ |  DIA |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[2] = 0.000000 / -1.000000 % |  UPD |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 % |  ENQ |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 % |  BTC |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 % |  SPO |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 % DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 % DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 % |  UP2 |   0.000 |   0.000 |   0.000 | +------+---------+---------+---------+ Dump of tm_adm structure:               Wed Sep 18 19:06:50 2013 =========================  Term    uid  man user    term   lastop  mod wp  ta   a/i (modes) RM-T14, U15,                 , , 00:36:04, M0, W-1,     , 1/0  Workprocess Comm. Area Blocks               Wed Sep 18 19:06:50 2013 =============================  Slots: 1000, Used: 1, Max: 1 +------+--------------+----------+-------------+ |   id | owner        |   pid    | eyecatcher  | +------+--------------+----------+-------------+ |    0 | DISPATCHER   |       -1 | 0xdeadbeef |  NiWait: sleep (5000ms) ... NiISelect: timeout 5000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:55 2013 NiISelect: TIMEOUT occured (5000ms) DpHalt: shutdown server >RK_NSP_00                               < (normal) DpJ2eeDisableRestart DpMBufRead: read server list from MBUF (1 entries) DpMBufMod: name [RK_NSP_00                               ], types 191 state 3 (0x2 0x0 0x0 0x0) DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3) AdGetSelfIdentRecord: >                                                                           < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 60 AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0 AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K DpWpBlksLow: wp_blks_in_queue/limit/max = 1/800/1000 DpLockWpBlkEx: lock wp ca_blk 1 make DISP owner of wp_ca_blk 1 DpRqIPutIntoQ: put elem in queue DIA, elems=6 DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 11) MBUF server state SHUTDOWN DpModState: change state STARTING -> SHUTDOWN  NiBufSend starting NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO) MsINiWrite: sent 110 bytes MsIModState: change state to SHUTDOWN DpModState: change server state from STARTING to SHUTDOWN DpHalt: switch off Shared memory profiling ShmProtect( 57, 3 ) ShmProtect(SHM_PROFILE, SHM_PROT_RW ShmProtect( 57, 1 ) ShmProtect(SHM_PROFILE, SHM_PROT_RD DpWakeUpWps: wake up all wp's DpHalt: stop work processes DpHalt: stop gateway killing process (3164) (SOFT_KILL) DpHalt: stop icman killing process (3644) (SOFT_KILL) DpHalt: terminate gui connections send SHUTDOWN to REM TM 14 DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000 DpLockWpBlkEx: lock wp ca_blk 2 return errno (-17) to T14 DpTmSend: errormsg without overhead: use mode 0 NiBufIAlloc: malloc NiBufadm, to 0 bytes DpTmSend: try to send 14 bytes to T14/M0  NiBufSend starting NiIWrite: hdl 33 sent data (wrt=14,pac=1,MESG_IO) REL WP ca_blk 2 set status of T14 to TM_DISCONNECTED NiBufISelUpdate: new MODE -- (r-) for hdl 33 in set0 SiSelNSet: set events of sock 1120 to: --- NiBufISelRemove: remove hdl 33 from set0 SiSelNRemove: removed sock 1120 (pos=4) SiSelNRemove: removed sock 1120 NiSelIRemove: removed hdl 33 DpDelSocketInfo: del info for nihdl 33 (pos/type=4/3) NiICloseHandle: shutdown and close hdl 33/sock 1120 NiBufIClose: clear extension for hdl 33 dp_tm_adm[14].stat = DP_SLOT_FREE DpGetSchedule: next schedule 1379531220/393000  DpGetSchedule: no schedule found DpITmSlotRelease: release slot 14 DpListRemove: remove elem 14 from tmadm_inuse_list DpListRemove: 14 elems in tmadm_inuse_list DpListInsert: insert elem 14 into tmadm_free_list (at begin) DpListInsert: 187 elems in tmadm_free_list DpHalt: wait for end of work processes DpHalt: wait for end of gateway [DpProcDied] Process lives  (PID:3164  HANDLE:1012) DpHalt: waiting for termination of gateway ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:56 2013 NiISelect: TIMEOUT occured (1000ms) *** ERROR => [DpProcDied] Process died  (PID:3164  HANDLE:1012  rc:0x0) [dpnttool2.c  147] DpHalt: wait for end of icman [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:57 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:58 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:36:59 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:00 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:01 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:02 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:03 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:04 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:05 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:06 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:07 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:08 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:09 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:10 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:11 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:12 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:13 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:14 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:15 2013 NiISelect: TIMEOUT occured (1000ms) [DpProcDied] Process lives  (PID:3644  HANDLE:1032) DpHalt: waiting for termination of icman ... NiWait: sleep (1000ms) ... NiISelect: timeout 1000ms NiISelect: maximum fd=1125 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Sep 19 00:37:16 2013 NiISelect: TIMEOUT occured (1000ms) *** ERROR => [DpProcDied] Process died  (PID:3644  HANDLE:1032  rc:0x0) [dpnttool2.c  147] DpStartStopMsg: send stop message (myname is >RK_NSP_00                               <) DpStartStopMsg: Write AD_STARTSTOP message with type=  0, name=RK_NSP_00           , sapsysnr= 0, hostname=RK                                                               AdGetSelfIdentRecord: >                                                                           < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 60 AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0 AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 4 AdCallRegisteredCvtToExt: opcode 4 call 000000014173F110 AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K DpConvertRequest: net size = 189 bytes NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes  NiBufSend starting NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO) MsINiWrite: sent 562 bytes MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name                    -, type 4, key - DpStartStopMsg: stop msg sent NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO) NiBufIIn: NIBUF len=274 NiBufIIn: packet complete for hdl 17  NiBufReceive starting MsINiRead: received 274 bytes MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER          , typ 0, key - DpHalt: received 164 bytes from message server NiIRead: hdl 17 recv would block (errno=EAGAIN) NiIRead: read for hdl 17 timed out (0ms) DpHalt: more messages from the message server DpHalt: send keepalive to synchronize with the message server  NiBufSend starting NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO) MsINiWrite: sent 114 bytes MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name           MSG_SERVER, type 0, key - MsSndName: MS_NOOP ok Send 4 bytes to MSG_SERVER NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO) NiBufIIn: NIBUF len=114 NiBufIIn: packet complete for hdl 17  NiBufReceive starting MsINiRead: received 114 bytes MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER          , typ 0, key - Received 4 bytes from MSG_SERVER                               Received opcode MS_NOOP from msg_server, reply MSOP_OK MsOpReceive: ok MsISendKeepalive : keepalive sent to message server NiIRead: hdl 17 recv would block (errno=EAGAIN) Thu Sep 19 00:37:17 2013 NiIPeek: peek for hdl 17 timed out (r; 1000ms) NiIRead: read for hdl 17 timed out (1000ms) DpHalt: no more messages from the message server DpHalt: sync with message server o.k. DpHalt: detach from message server ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12635]  NiBufSend starting NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO) MsINiWrite: sent 110 bytes MsIDetach: send logout to msg_server (RK / 3900) MsIDetach: call exit function DpMsShutdownHook called NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0 SiSelNSet: set events of sock 1008 to: --- NiBufISelRemove: remove hdl 17 from set0 SiSelNRemove: removed sock 1008 (pos=2) SiSelNRemove: removed sock 1008 NiSelIRemove: removed hdl 17 DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4) MBUF state OFF AdGetSelfIdentRecord: >                                                                           < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 60 AdCallRegisteredCvtToExt: opcode 60 call 00000001417434D0 AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCallRegisteredCvtToExt: opcode 40 AdCallRegisteredCvtToExt: opcode 40 call 0000000141744290 AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000 DpLockWpBlkEx: lock wp ca_blk 2 make DISP owner of wp_ca_blk 2 DpRqIPutIntoQ: put elem in queue DIA, elems=7 DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14) MBUF component DOWN NiICloseHandle: shutdown and close hdl 17/sock 1008 NiBufIClose: clear extension for hdl 17 MsIDetach: detach MS-system (RK / 3900) DpHalt: cleanup EM EsCleanup( ) EsCleanup .... EmCleanup() -> 0 Em2Cleanup: Cleanup EM2 Eg2Cleanup: Cleanup EG2 Es2Cleanup: Cleanup ES2 Es2ResLocSlotClear: clear slot 0 Es2ResLocSlotClear: clear slot 0 Es2ResLocSlotClear: clear slot 0 Es2ResLocSlotClear: clear slot 0 ***LOG Q05=> DpHalt, DPStop ( 3044) [dpxxdisp.c   11107] DpHalt: Good Bye .....    ********************************************************************************************************************************************************************* DEV_W0 file  ********************************************************************************************************************************************************************* --------------------------------------------------- trc file: "dev_w0", trc level: 1, release: "720" --------------------------------------------------- * *  ACTIVE TRACE LEVEL           1 *  ACTIVE TRACE COMPONENTS      all, MJ * M sysno      00 M sid        NSP M systemid   562 (PC with Windows NT) M relno      7200 M patchlevel 0 M patchno    46 M intno      20020600 M make       multithreaded, Unicode, 64 bit, optimized M profile    \\RK\sapmnt\NSP\SYS\profile\NSP_DVEBMGS00_RK M pid        3416 M  M   M Thu Sep 19 00:36:00 2013 M  kernel runs with dp version 125000(ext=118000) (@(#) DPLIB-INT-VERSION-125000-UC) M  length of sys_adm_ext is 588 bytes M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 3416) [dpxxdisp.c   1314] I  MtxInit: 30000 0 0 M  DpSysAdmExtCreate: ABAP is active M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is active M  DpIPCInit2: read dp-profile-values from sys_adm_ext M  DpShMCreate: sizeof(wp_adm)          31696     (2264) M  DpShMCreate: sizeof(tm_adm)          5517056     (27448) M  DpShMCreate: sizeof(wp_ca_adm)          64000     (64) M  DpShMCreate: sizeof(appc_ca_adm)     64000     (64) M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/584064/584080 M  DpShMCreate: sizeof(comm_adm)          584080     (1144) M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=512/48/65600/90416/156064 M  DpShMCreate: sizeof(slock_adm)          156064     (104) M  DpFileTableSize: max/headSize/ftSize/tableSize=2800/16/268864/268880 M  DpShMCreate: sizeof(file_adm)          268880     (80) M  DpShMCreate: sizeof(vmc_adm)          30128     (2152) M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192) M  DpShMCreate: sizeof(gw_adm)     48 M  DpShMCreate: sizeof(j2ee_adm)     3936 M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000DE30050, size: 6812336) M  DpShMCreate: allocated sys_adm at 000000000DE30060 M  DpShMCreate: allocated wp_adm_list at 000000000DE33030 M  DpShMCreate: allocated wp_adm at 000000000DE33220 M  DpShMCreate: allocated tm_adm_list at 000000000DE3AE00 M  DpShMCreate: allocated tm_adm at 000000000DE3AE50 M  DpShMCreate: allocated wp_ca_adm at 000000000E37DD60 M  DpShMCreate: allocated appc_ca_adm at 000000000E38D770 M  DpShMCreate: allocated comm_adm at 000000000E39D180 M  DpShMCreate: allocated slock_adm at 000000000E42BB20 M  DpShMCreate: allocated file_adm at 000000000E451CD0 M  DpShMCreate: allocated vmc_adm_list at 000000000E493730 M  DpShMCreate: allocated vmc_adm at 000000000E4937E0 M  DpShMCreate: allocated gw_adm at 000000000E49ADA0 M  DpShMCreate: allocated j2ee_adm at 000000000E49ADE0 M  DpShMCreate: allocated ca_info at 000000000E49BD50 M  DpShMCreate: allocated wall_adm at 000000000E49BD70 M  DpCommAttachTable: attached comm table (header=000000000E39D180/ft=000000000E39D190) M  DpSesCreateTable: attached session table at 0000000002AA0050 (len=161328) M  DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm M  rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80 X  EmInit: MmSetImplementation( 2 ). X  MM global diagnostic options set: 0 X   client 0 initializing .... X  Using implementation view X   Using memory model view. M   Memory Reset disabled as NT default X  ES initialized. M  DpVmcSetActive: set vmc state DP_VMC_ENABLED M  DpVmcSetActive: set vmc state DP_VMC_ACTIVE M  DpVmcInit2: o.k. M  ThStart: taskhandler started M  ThInit: initializing DIA work process W0 M   M Thu Sep 19 00:36:02 2013 M  ThInit: running on host RK M  calling db_connect ... B  create_con (con_name=R/3) B  Loading DB library '\\RK\saploc\NSP\DVEBMGS00\exe\dbsdbslib.dll' ... B   B Thu Sep 19 00:36:03 2013 B  Library '\\RK\saploc\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded B  Version of '\\RK\saploc\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "720.00", patchlevel (0.45) B  New connection 0 created C   C  DBSDBSLIB : version 720.00, patch 0.045 (Make PL 0.46) C  MAXDB shared library (dbsdbslib) patchlevels (last 10) C    (0.045) Unknown primary key (note 1459400) C    (0.039) Define your own command buffersize (note 1340617) C    (0.031) Dbm commands support added (note 1420733) C    (0.027) Count of records for bulk insert optimized (note 1340617) C    (0.021) Connect with special xuser key (note 1390464) C    (0.018) Error handling for external update statistics changed (note 1340617) C    (0.018) Dbsl procedure to update datasource information (note 1340617) C    (0.015) Special describe handling on MaxDB systemtables (note 1382175) C    (0.013) Possibility to disable UPSERT statements (note 1340617) C    (0.013) Check for external update statistics changed (note 1340617) C   C   C  Loading SQLDBC client runtime ... C   C Thu Sep 19 00:36:04 2013 C  SQLDBC Module  : C:\sapdb\clients\NSP\pgm\libSQLDBC77.dll C  SQLDBC SDK     : SQLDBC.H  7.7.4    BUILD 009-123-173-450 C  SQLDBC Runtime : libSQLDBC 7.8.1    BUILD 014-121-233-288 C  SQLDBC client runtime is MaxDB 7.8.1.014 CL 233288 C  SQLDBC supports new DECIMAL interface : 1 C  SQLDBC supports VARIABLE INPUT data   : 1 C  SQLDBC supports VARIABLE OUTPUT data  : 1 C  SQLDBC supports Multiple Streams      : 1 C  SQLDBC supports LOB LOCATOR KEEPALIVE : 1 C  SQLDBC supports LOB LOCATOR COPY      : 1 C  SQLDBC supports BULK SELECT with LOBS : 1 C  INFO : SQLOPT= -I 0 -t 0 -S SAPR3 C  Try to connect (DEFAULT) on connection 0 ... C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[5] database not running))  [dbsdbsql.cpp 139] B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh         1241] B  ***LOG BY2=> sql error -10709 performing CON [dblink       540] B  ***LOG BY0=> Connection failed (RTE:[5] database not running) [dblink       540] M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1461] M  in_ThErrHandle: 1 M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   11087] M   M  Info for wp 0 M   M    pid = 3416 M    severity = 0 M    status = 0 M    stat = WP_NEW M    waiting_for = NO_WAITING M    reqtype = DP_RQ_DIAWP M    act_reqtype = NO_REQTYPE M    req.req_info =  M    req.tid = -1 M    req.uid = 4294967295 M    req.mode = 255 M    req.len = -1 M    req.rq_id = 65535 M    req.rq_source =  M    req.vm = no VM M    last_tid = 0 M    last_uid = 0 M    last_mode = 0 M    act_cs_count = 0 M    csTrack = 0 M    csTrackRwExcl = 0 M    csTrackRwShrd = 0 M    mode_cleaned_counter = 0 M    control_flag = 0 M    int_checked_resource(RFC) = 0 M    ext_checked_resource(RFC) = 0 M    int_checked_resource(HTTP) = 0 M    ext_checked_resource(HTTP) = 0 M    report = >                                        < M    action = 0 M    tab_name = >                              < M    attachedVm = no VM M   M  ThIErrHandle: current request: M   M  -IN-- sender_id ?                 tid  -1    wp_ca_blk   -1      wp_id -1 M  -IN-- action    -                 uid  -1    appc_ca_blk -1      type  -     M  -IN-- new_stat  NO_CHANGE         mode 255   len         -1      rq_id -1 M   M  ***************************************************************************** M  * M  *  LOCATION    SAP-Server RK_NSP_00 on host RK (wp 0) M  *  ERROR       ThInit: db_connect M  * M  *  TIME        Thu Sep 19 00:36:04 2013 M  *  RELEASE     720 M  *  COMPONENT   Taskhandler M  *  VERSION     1 M  *  RC          13 M  *  MODULE      thxxhead.c M  *  LINE        11364 M  *  COUNTER     1 M  * M  ***************************************************************************** M   M  PfStatDisconnect: disconnect statistics M  Entering TH_CALLHOOKS M  ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP M  ThCallHooks: hook >ThrBtcCallLgCl< o.k. M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   779] M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  303] M  ThCallHooks: hook >ThrSaveSPAFields< o.k. M  ThIErrHandle: entering ThSetStatError M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) M  Entering ThReadDetachMode M  call ThrShutDown (1)... M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 3416) [dpnttool.c   339]        ****************************************************************************************************************************************************************)

Hi All,

While editing email template for notifications, can we add custom text elements (other than standard ones) which are chosen at runtime.

Here is screenshot for standard text elements available. Let me know from where to add custom one if possible.

Thanks,

Rohan

Hello,

Just for curiosity, i found that on Solution Manager ITSM CRMWEBUI search options there isn't the possibility to use select-options as is available on Abap Reports.

For example, how you can save a serach for only 10 individual "incidents", look a sample image:

The first image is for solution manager ITSM incident search options, and the second images is report CRM_DNO_MONITOR.

Thanks ¡

Luis

I have noticed this requirement coming from many of my customer's of ChaRM or Change Request Management few years back that they would like to cover several types of changes within the same type of Request for Change(RfC). Earlier this wasn't possible in Solution Manager 4.0/7.0 version but now in Solution Manager 7.1, it is available.

It is now possible to create multiple Change Documents for single Request for Change(RfC) one by one or even in parallel.

For. e.g let say we have an authorized Request for Change (RfC) in BEING IMPLEMENTED state as shown below

Now for the same Request for change we can observe there is an existing General Change getting implemented. To add new Change Document just click action tab in the edit mode and choose extend scope.

Now status will be changed to Extend Scope and we can see the Insert button is visible in Request for Change Scope Assignment Block

Add a new change document say Urgent Correction to the same RfC as shown below.Click on action tab and choose Release for Approval action. Save it.

Status will be changed to TO BE APPROVED and now change manager can approve it. Once Change Manager approves it, he/she release it for development as shown below.

Upon saving above we now notice 2 Change Documents with different status running for the same Request for Change (RfC)

Thus, above steps shows how we can achieve multiple Change Documents or Implement multiple change with a single Request for Change(RfC).

Note: Normal Corrections are based upon Project Cycle or Maintenance Cycle so we have used General and Urgent Change which are independent from the project phase.

Similarly,  if we have a Request for Change(RfC) with IMPLEMENTED status for which Change Document is already complete and now we want to create a new Change Document for it. This is also possible.

Again click the action EXTEND SCOPE

Now execute the same cycle and new Change Document will be created for the existing Request for Change(RfC)